Fractal Design Celsius+ S24
An upgrade of Celsius liquid cooling solution, the Celsius+ takes AIO water cooling to a new level with an ARGB-accented pump face, a fully redesigned block and an upgraded on-radiator PWM fan hub with ARGB support. You’ll get the same extreme cooling performance and minimum noise output for mainstream Intel/AMD platforms, and enjoy the new RGB brilliance that can sync with your system lighting.
Dual speed control modes offer the right choice for various needs. Select Auto Mode for automatic fan and pump speed adjustment based on temperature, or switch to PWM Mode to precisely tune the speed. Cleverly concealed wiring in the braided sleeve tubing cleanly connects both power and RGB for the entire system at the pump. And the durable water tubing is protected in braided sleeves to maintain loop integrity over years of use.
Available radiator sizes include 240 mm, 280 mm, and 360 mm, each with a choice of Dynamic X2 or Prisma ARGB fans pre-installed.
Stylish glass pump face with backlit logo and ARGB LED effects.
The Perfect Balance
Intelligent auto mode dynamically adjusts fan and pump speeds for optimized silent performance.
Doing the Twist
Simply twist the pump cap to switch from auto to PWM mode.
Tidier through Technology
Integrated fan and ARGB connector hub for easy installation and cable routing.
Dynamic X2 PWM fans provide excellent airflow and powerful cooling with minimal noise.
Up Our Sleeves
Braided tube sleeves contain the fan control cables and ARGB wires.
Forget the Thermal Paste
Thermal paste comes pre-applied with an optimal application for mess-free installation.
Accessory Box Contents
FRACTAL DESIGN CELSIUS+ S24 DYNAMIC ARGB CPU LIQUID COOLER (FD-W-2-S2401)
Celsius+ takes AIO water cooling to a new level with an ARGB-accented pump face, a fully redesigned block and an upgraded on-radiator PWM fan hub with ARGB support.
- Tinted glass pump face with backlit logo and ARGB LED effects
- Articulating elbow fittings make tubes easier to route and reduces tension on the pump
- Backed by a 5-year warranty for extended peace of mind
Cool, quiet and colorful
Stylish glass pump face with backlit logo and ARGB LED effects
- High-performance Dynamic PWM fans for excellent airflow and minimal noise
- Optimized fan geometry balances airflow with extra emphasis on static pressure
- Strategic blade notches diffuse noise from blade/stator interaction
- Trip Wire technology reduces blade turbulence
- LLS (Long Life Sleeve) fan bearings provide silent operation with a long lifespan
Get the balance right
Our intelligent auto mode dynamically adjusts the fan and pump speeds for optimized silent performance – and a simple twist of the pump face changes to PWM mode for full user control
Tidier through technology
ARGB-enabled PWM hub places all fan connections directly on the radiator for a clutter-free installation
Forget the thermal paste
With the Celsius+, the thermal paste is pre-applied to ensure a mess-free installation
Your options for controlling the color effects of Celsius+ are continually growing, with current certifications including Asus AURA, Gigabyte Fusion, MSI Mystic Light, Razer Chroma and ASRock Polychrome support
Mounting made easy
Supports the most common sockets for both Intel and AMD
Up our sleeves
Braided tube sleeves readily contain both the fan control cables and ARGB wires.
|Sockets supported (Intel)||1200, 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, 2066|
|Sockets supported (AMD)||AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, FM2+, TR4 (via included bracket in AMD Threadripper box)|
|Tube length||400 mm|
|Tube material||Low-permeability rubber with braided nylon sleeve|
|Fittings, block side||Articulating 90-degree elbow|
|Fittings, radiator side||Straight rotary|
|Fan control||Dual mode (Auto/PWM)
Note:-The Celsius+ is NOT compatible with the Adjust R1
|Fan type||Dynamic X2 GP-12 PWM|
|Rotational speed||500 – 2000 RPM|
|Acoustical noise (full speed)||32.2 dBA|
|Maximum air flow||87.6 CFM|
|Maximum static pressure||2.3 mm H2O|
|Input voltage||12V DC|
|Maximum input current||0.2A|
|Rotational speed||800-2800 RPM in normal use, 3500 RPM during thermal protection mode that activates if liquid temperature is over 60°C|
|Bearing type||Ceramic bearing and shaft|
|Acoustical noise (full speed)||20 dBA|
|Maximum pressure||14.4 kPa / 1.46 mm H2O /2.0 PSI|
|Input voltage||12V DC|
|Input current (without fans)||0.36A|
|Block height||45 mm|
|Block measurements (with fittings)||86 x 75 mm|
|Block diameter (main block body)||62 mm|
|Dimensions||122 x 31 x 284 mm|
|Fan screw threads||6-32|
|Package Dimensions||411 x 180 x 145 mm|